The mixer is driven by the internal and external diameter screw mounted on the mixing shaft to drive the material of the barrel in the barrel, so that the mixer can move the rubber and other materials in the maximum range of the barrel, so that the rubber can be circulated in the barrel and cut and mixed in the barrel, and the rubber can be quickly and evenly mixed in a short time. Therefore, it is necessary to use the large current slip ring on the mixer to rotate the equipment coaxially.
Rubber material mixer
The MT series of large current slip ring produced by the XX electronic technology company is designed to be used for the rubber mixer and other large power equipment. The plastic mixer uses the slide ring model for MT191-P0475-P0320-S02, the aperture 191mm, the 4 road 75A plus the 3 20A and 2 road sensor signals.
For the purpose of using a slip ring that has been used for a long time, it is still reliable and durable
The conductive slip ring can be customized according to customer requirements: more road number selection (1-96 Road), optional plug and heat shrinkable tube; wire length; shielded cable; mixed high-speed data transmission (Ethernet transmission, USB, Profibus); signal, coaxial cable, power line mixed thermocouple signal mixing; anti shock and explosion proof, high temperature Special environment customization; air pressure and hydraulic mixing; high temperature customization can reach 250 degrees, high voltage and high current customization (1000A, 10 thousand volts); military level.
